Product description
The LogTag® TICT iS0°Tag® is a tamperproof,irreversible electronic indicator which shows if the temperature has been at or below freezing point (0°C or 32°F) for 60 minutes.
Download
Product classification
|
Model-Number |
TICT-iS0°Tag® |
|
Operating Temperature Range |
-25°C to +60°C |
|
Storage Temperature Range |
-25°C to +65°C |
|
Ambient humidity range during transport and use |
0 to 95%RH |
|
Resolution |
0.1°C or better in range of -25°C to+60°C |
|
Accuracy |
• Better than ±0.5°C for -10°C to +25°C • Better than ±1°C for -25°C to -10°C • Better than ±1°C for +25°C to +60°C |
|
Capacity |
• Minimum & Maximum temperature for each of the 1096 days • Duration of excursion beyond alarm limits for each day • Up to 270 recorded real time temperature values each before and after the alarm has triggered |
|
Memory type |
Non volatile |
|
Sampling Interval |
Factory set from 5 to 15 minutes, typically set to 5 minutes. |
|
Logging modes |
1096 day statistics with temperature/time excursions and a mark entry 540 real time readings |
|
Logging Start delay |
Factory configuration, typically set to 60 minutes |
|
Sensor |
Precision thermistor |
|
Sensor Reaction time |
T90 less than 7 minutes by method detailed in EN12830:1999 |
|
Vibration |
Withstands vibration specification as detailed in EN12830:1999 |
|
Shock |
• Withstands shock specification as detailed in EN12830:1999 • Withstand 5 drops 1m to smooth concrete floor without loss of function or calibration |
|
Environmental |
IEC 60529: IP64 |
|
Power source |
3V Lithium battery – non replaceable |
|
Battery life |
• Minimum storage life of 12 Months before ‘start’ • Monitoring period: 1096 days (includes storage time) |
|
Size |
71.5mm(H) x 33.0mm (W) x 8.6mm (T) (Volume < 21cm3) |
|
Weight |
19g |
|
Case Material |
Polycarbonate |
|
Calibration |
Covered by Certificate of Traceability. Calibration traceable to an ISO/IEC 17025 accredited testing laboratory. |
|
EMC compliance |
• EC EMC directives (EN 61000-6-1:2005 & EN 61000-6-3:2006) • Includes electrostatic discharge as prescribed in EN 61000-4-2 • Complies with FCC Part 15 Subparts A and B |
|
Alarms function & display |
• One low and one high alarm, indicated on the display • Display always active to instantly show load status • Display is static allowing photocopying |
